extruded sealing lip profile
for roller shutter profile types 1.95R and TH80
This extruded sealing lip profile with 110 sealing lip can be used in conjunction with profile types 1.95 R and TH80 / ALU R.
Available in aluminum.
The sealing lip lies against the lintel when the roller door is shut. This seal can reduce heat losses through the gap that occurs when the roller shutter is unrolled.
In the case of smaller roller shutter doors, this gap can also be kept as small as the distance between the guide rails and the door opening by using roll-on brackets.
Please note: In conjunction with a sealing lip, the bale diameter increases by at least 20-30 mm.